Clarion NZ502 - REAR SOURCE OPERATIONS

24 NZ502
English
English
15. AUX 1 / AUX 2 OPERATIONS
Externalperipheraldevices,includingagameconsole,camcorder,iPod/iPhone,etc.canbeconnectedtothe
AUX 1 or AUX 2 connector on the front or back of this unit using the A/V media cables.
Switching to AUX IN / AV IN mode
• Press[AUX 1] or [AUX 2]buttononMainMenutoselectdesiredmode(whenunitisconnected).If
theexternaldeviceconnectedtoAUX1orAUX2inputhaveaudiosignal,theunitwillbroadcastaudioofexternal
device.
You cannot directly control external devices connected to AUX 1or AUX 2 input.
16. CAMERA OPERATIONS
Switching to Camera mode
Press[Camera] button on Main Menu to select desired mode.
TheLCDwilldisplaytheexternalcameravideo.Thescreenwilldisplay“NoVideoSignal”menu,ifavalidcamera
is not connect to this head unit.
PressMenubuttononOperationalPaneltoreturntotheMainMenu.
Note:
If the reverse cable is connected correctly to the car, the center unit to switch to camera mode automatically when the
car is in reverses.