Clarion NZ502 - TURNING THE POWER ON; Selecting a Source

7NZ502
English
English
•PresstoMUTEinTunermode.
•Pressandholdtostopaudioorvideoles.
[VOL+][VOL-] Buttons
• PresstoIncreaseanddecreasevolume.
[OPEN] Button
•Pressthisbuttontoopen/closeTFTpanel.
•PressandholdtoenterTFTpanelanglesetting
options.
[MENU/POWER] button
• Pressthiskeytopoweronthesysteminpoweroff
mode.
• Keeppressingthiskeymorethan2secondtoturn
offthesystemwhensystemisinpoweronmode.
• Pressthisbuttontodisplaymainmenu,pressagain
toreturncurrentsourcewhensystemisinpoweron
mode.
[BND/END PS] Button
BND Function:
•PressthisbuttontoenterAM/FMtunermodefrom
any source.
•OnceinAM/FMtunermode,youcanpressinto
changebandsamongFM1,FM2,FM3,AMbands.
•PressandholdtostartPresetScan.Pressagainto
stop.
END Function:
Onlybeavailablewhenacallincomingorintelephone
talking.
•Presstorejectcallwhenacallincoming.
•presstoendacallwhenintelephonetalking.
[ISR/SEND] Button
ISR Function:
When in tuner mode, press and hold this button for
3 seconds to save current station and band to ISR
memory,andatthesametime,thetunerwillenter
ISRmodewithcurrentstation.
Note:
In ISR mode, the tuning operation is disabled. Press
this button again to quit ISR mode.
When in the other mode but not tuner mode, press
this key will go to ISR memory station directly, it likes a
shortcut. Press this key again to go back to previous
mode.
SEND Function:
Onlybeavailablewhenthereisacomingcall.
•Pressthiskeytoacceptthecomingcall.
•Presstoswitchtoprivatemodewhenintalking.
[IR] SENSOR
•Receiverfortheremotecontrolunit(operatingrange:
30 degree in all directions).
[microSD]
• InsertamicroSDinthis.
Note: The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.