'iURC'~
System check
The CeNET format utilized
on
this unit is
provided with a system check function. The
operation panel's system check menu is
displayed under the following conditions:
• When power is first turned on after initial
installation.
• When an external device is connected or
disconnected.
• When batteries are changed or otherwise
when power
is
disconnected.
• When reset button
is
pressed.
*
In
addition to the above conditions, when the
liquid crystal panel
is
open and the "PUSH
POWER KEY" message is displayed, the
system check screen can be displayed by
pressing the [SOURCE] button.
•
•
•
10 VRX755VD
To Next Page
Loading...
Need help?
General
