DVD Video Player Operations
.When
watching
through
a
conventional
type
of
the
rear
view
monitor
(4:3)
• N
PS
: The leftmost and rightmost areas of
the screen are cut off.
This function allows displaying the important
part of image fUlly on the screen.
In
some
cases, image is displayed while being
panned (scrolled).
• N
LB
: A black zone is created
in
the top and
bottom areas of the screen.
3.
Touch the [RTN] key ([ESC] key).
This method displays Cinema Scope and
Vista Vision images without cutting them off
by creating a black zone on the top and
bottom gaps.
.When
watching
through
a
wide
type
of
the
rear
view
monitor
(16:9)
• WIDE:
4.
Touch the
[T]
key.
Touch the
[~]
key to
return to the previous menu.
Selecting the DVD SETUP
menu
1.
Touch the screen to show the menu screen.
2.
Touch the [SUB] key to display the sub
menu.
3.
Touch the [SETUP] key to display the DVD
SETUP menu.
Notes:
•
If
the SETUP operation is performed in the middle
of
DVD video play, the disc plays from the
beginning.
• Various settings
of
the SETUP menu cannot be
made with the remote control unit.
Changing DVD System Settings
5.
Touch the [RTN] key ([ESC] key).
Setting
up
the screen size
Set up the screen size according to the rear
view monitor which is connected to this unit.
1.
Follow the steps 1 to 3
in
"Selecting
the
DVD SETUP menu".
2.
Each time you touch the [TV DISPLAY]
key,
you can change amoung the screen size
in
the following order.
"WIDE"
-+
"N
PS"
-+
"N
LB"
-+
"WIDE"
*The factory default setting is "WIDE".
Setting
up
the angle
mark
display
You
can set up so that the angle mark appears
on scenes where the angles can be switched.
1.
Follow the steps 1 to 3
in
"Selecting
the
DVD SETUP menu".
2.
Touch the [ANGLE] key to select "ON" or
"OFF".
*The factory default setting is "OFF".
3.
Touch the [RTN] key ([ESC] key).
Setting
up
the
disc
menu
language.
1.
Following the steps 1 to 3
in
"Selecting
the
DVD SETUP menu", touch the [MENU
LANGUAGE]
key.
VRX755VD 33