fl.
111111
'
1%
"1);'.0;
:«
~
;:
:'
~
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing
the DCP
1.
Press the [SOURCE] button for 1 second or
longer to turn off the power.
2.
Deeply push
in
[FRONT OPEN] button to
unlock the front panel.
* If the front panel does not open fully, gently
open it with your hand.
3.
Pull the DCP toward you and remove it.
4.
Close the HOLD
FLAP.
Be
sure
to
close
the
HOLD FLAP
for
safety
when removing
the
DCP.
Attaching
the DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
• The DCP can easily be damaged
by
shocks.
After
removing it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• If
the
front
panel
is
kept open,
the
DCP
may
drop
due
to
vibration
of
the
car.
This
results
in damage
to
the
DCP.
So
close
the
front
panel
or
remove the DCP
to
store
into
the
case.
• The
connector
connecting
the
source
unit
and
the
DCP
is
an extremely
important
part. Be careful
not
to
damage
it
by
pressing
on
it
with
fingernails,
screwdrivers, etc.
• Remote
control
unit
cannot
be used when
front
panel
is
open.
Note:
•
If
the DCP is dirty, wipe
off
the dirt with a soft dry
cloth
only.
VRX755VD 19