Radio Operations
FM
reception
For enhanced FM performance the
mR&I:ruNEC]
® tuner includes signal actuated stereo control,
Enhanced Multi AGe, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Listening
to the radio
1.
Press the [SOURCE] button and select the
Radio mode. The frequency is displayed.
2. Press the
[BAND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes
in
the
following order:
FM1
...
FM2
...
FM3'"
AM'"
FM1
...
3.
Press the
[<~]
or
[I~>]
button to tune
in
the
desired station.
Seek
tuning
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Tune
in
to a station.
*If "MANU"
is
lit
in
the
display,
press and hold
the
[BAND] button for 1 second or longer.
"MANU"
in
the display goes off
and
seek
tuning
is
now available.
*The same operation
is
also available
by
using
the
[BAND]
key.
3.
Press the
[<~]
or
[~>]
button to
automatically seek a station.
When the
[~>]
button is pressed, the station
is sought in the direction of higher
frequencies; when the
[<~]
button is
pressed, the station is sought in the direction
of lower frequencies.
*The same operation
is
also available by using
the
[~]
or
[~]
key.
Selecting
stations
with the KEY
PAD
*This function displays the KEY
PAD
on
the screen
enabling
you
to tune
by
entering a frequency.
1.
Touch the [SRCH] key to switch the KEY
PAD.
2.
Touch the [0]
....
[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]
....
[9] key), you can cancel
that to touch the
[CLR]
key.
3.
Touch the [ENT]
key.
The radio station you
required would be tuned.
4.
Touch the [ESC]
key.
Manual
tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are
in
the step tuning mode, the
frequency changes one step at a time.
In
quick
tuning mode, you can quickly tune the desired
frequency.
1.
Press the [BAND] button and select the
desired band. (FM or AM)
*
If
"MANU"
is
not lit
in
the
display,
press
and
hold the [BAND] button for 1 second or longer.
"MANU" appears
in
the display and manual
tuning is now
available.
*The same operation
is
also available by using
the
[BAND]
key.
2.
Tune into a station.
•
Quick
tuning:
Press and hold the
[<~]
or
[~>]
button for 1
second or longer to tune in a station.
• Step
tuning:
Press the
[<~]
or
[~>]
button to manually
tune in a station.
Recalling a
preset
station
A total of 24 preset positions (6-FM1 , 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
There are 2 ways available to recall the preset
station.
• Using
the
[DIRECT]
button
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Press the corresponding [DIRECT] button to
recall the stored station.
* Press and hold one of the [DIRECn buttons
for 2 seconds or longer to store that station
into preset memory.
VRX755VD 31
To Next Page
Loading...
Need help?
General
