Basic Operations
Monitor
image
and
sound
with
2-Z0NE
ON/OFF
• With 2-Z0NE function OFF
~
Front
monitor
lock
ON
Front
monitor
lock
OFF
Visual
connection
Visual
connection
Visual
connection
I
Visual
connection
[OTHERS]
[NAVI]
[OTHERS]
[NAVI]
Front
image
Image of device
Image of device
Displays image of mode selected
(receiver
screen)
connected to the connected to the using the [SOURCE] button.
Visual terminal Visual terminal
(*3)
Rear
monitor
Displays image of mode selected using the [SOURCE] button. (*2)
image
(separately
sold)
Audio
output
Sound from mode selected with [SOURCE] button
is
output from 4ch speaker,
NON-FADER, and AUDIO-OUT.
• When 2-Z0NE function
is
ON
~
Front
monitor
lock
ON
Front
monitor
lock
OFF
Visual
connection
Visual
connection
Visual
connection
I
Visual
connection
[OTHERS]
[NAVI]
[OTHERS]
[NAVI]
Front
image
Image of device
Image of device
Displays image of mode selected
(receiver screen)
connected to the connected to the using the main unit's [SOURCE]
Visual terminal
Visual terminal
button
(*3)
Rear
monitor
Displays image from mode (DVD or VISUAL) selected with remote control unit's
image
[SOURCE] button.
(separately
sold)
Audio
output
• Sound from mode selected with main unit's [SOURCE] button
is
output from
4ch speaker, and AUDIO
OUT.
• Sound from mode selected with remote control unit's [SOURCE] button
is
output from
NON~FADER.
*1
A device connected to the Visual terminal
should be set up as described
in
the section
"Switching
CONNECT'.
*2
No
image is displayed
on
the rear monitor
when a non-image mode such as radio,
SIRIUS, CD, etc.
is
engaged.
*3
For safety reasons, this image is not
displayed when the vehicle is moving. The
picture can be watched only when the
vehicle is standing still and the parking brake
is
engaged.
30 VRX755VD
When
2-Z0NE
is
ON,
the
NON-FADER
OUTPUT level
is
fixed
at
equivalent
to
VOL27
(high
volume).
When
an
external
amplifier
or
speakers are
attached
to
the
NON-FADER OUTPUT
connectors,
do
not
set
the
unit
to
the
2-
ZONE mode,
since
a
high
volume
of
sound
will
be
suddenly
output
from
the
speakers
connected
to
the
NON-FADER OUTPUT,
potentially
causing
damage
to
the
connected
amplifier
or
speakers.
To Next Page
Loading...
Need help?
General
