Basic
Operations
Adjusting
the GENERAL
Setting the BEEP
*The sound heard when you make operations is
called "beep". The unit can be set up so that it
does not produce this beep sound.
*The factory default setting is
"BEEP
ON".
1. When
the
panel is open, press
the
[ADJ]
button
to
select the
ADJUST
mode menu.
2. Touch
the
[GENERAL]
key.
Touch the
[BEEP]
key
to
select "ON"
and
"OFF".
3. Touch
the
[RTN]
key,
[ESC]
key,
or
press the
[A
OJ] button.
Setting the
button
illumination
*The factory default setting is "GREEN" (green).
1. When
the
panel is open, press the
[ADJ]
button
to
select the
ADJUST
mode
menu.
2. Touch the
[GENERAL]
key.
3. Touch
the
[KEY
ILLUMI]
key
to
select "RED"
(red)
or
"GREEN" (green).
4. Touch
the
[RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
Clock
Adjustment
1. When
the
panel is open, press the
[ADJ]
button to select the
ADJUST
mode
menu.
2. Touch the
[GENERAL]
key.
Touch the [CLOCKJ key to adjust the time.
3. Touch the
LA.],
[T],
[a.rn]
or
[p.rn] key to
adjust the time, then touch
the
[SET]
key.
*The time is displayed
in
12-hour format.
4. Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ]
button.
Setting the
Auto
Panel
When you remove
or
attach the
OCp,
you can
set the liquid crystal panel automatically housing
or
opening.
*The factory default setting
is
"ON".
1.
Press the [ADJ] button to select the
ADJUST
mode menu.
2. Touch
the
[GENERAL]
key.
Touch the [AUTO PANEL] key
to
set "ON",
"OFF"
or
"CLOSE".
28 VRX755VD
ON:
The
liquid crystal panel houses
automatically after removing the
DCP.
And
the
liquid crystal panel open
automatically after attaching the
DCP.
OFF: Normal operation.
CLOSE:
The
liquid crystal panel houses
automatically after removing the
DCP.
3. Touch the [RTN]
key,
[ESC]
key,
or
press the
[AOJ] button.
SWitching CONNECT(connect)
Make the following settings when an external
device is connected to the Visual terminal.
NAVI: when a navigation system is
connected
*When a navigation system is
connected, use the monitor lock
function. Locking the monitor locks
the screen size
in
F.WIDE mode (full
wide) and the VTR system to NTSC.
OTHERS:
for external devices other than a
navigation system
NONE:
when
no external devices are
connected
*The factory default setting is "NONE".
1. When the panel is open, press the [ADJ]
button
to
display the
ADJUST
mode
menu.
2. Touch the
[GENERAL]
key.
Touch the [CONNECT] key to select "NAVI"
or
"OTHERS"
or
"NONE".
3. Touch the [RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
Time
setting
in
air
conditioner
operation
mode
This setting can be used to adjust the time the
panel stays in the horizontal position when
in
the air conditioner operation mode.
* The factory default setting is
"1
Os".
1. Press
the
[ADJ]
button.
2. Touch
the
[GENERAL]
key.
3. Touch the [HVAC MODE] key to set
to
"5s,"
"10s,"
or
"30s."
4. Touch
the
[RTN]
key,
[ESC]
key,
or
press the
[ADJ]
button.
To Next Page
Loading...
Need help?
General
