Radio Operations
• Using the LIST screen
1.
Touch the [LIST]
key.
2.
Touch the corresponding [DIRECT] key to
recall the stored station.
*
You
can select the desired band to touch the
[BAND]
key.
*Touch and hold the [DIRECT] key for 2
seconds or longer to store the current station
into preset memory.
3.
Touch the [RTN] key or the [ESC] key to
return to the previous mode.
Manual memory
• Using the [DIRECT] button
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Select the desired station with seek tuning,
manual tuning, or preset tuning.
3.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
• Using the LIST screen
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Select the desired station with seek tuning,
manual tuning, or preset tuning.
3.
Touch the screen to display the menu, then
touch the
[LIST]
key.
4.
Touch and hold one of the [DIRECT] key for
2 seconds or longer to store the current
station into the preset memory.
Auto store
Auto store is a function for storing
up
to 6
stations that are automatically tuned
in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
32 VRX755VD
1.
Press the [BAND] button and select the
desired band. (FM or AM)
2.
Touch the [LIST]
key.
3.
Touch and hold the
[AS]
key for 2 seconds or
longer.
The stations with good reception are stored
automatically to the preset channels.
Preset scan
Preset scan receives the stations stored
in
preset memory
in
order. This function
is
useful
when searching for desired station
in
memory.
1.
Touch the [LIST]
key.
2.
Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3.
When the desired station
is
turned
in,
touch
the
[PS] key again to continue receiving that
station.
Instant station recall (ISR)
Instant station recall
is
a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit
in
other modes.
elSR
memory
1.
Select the station that you wish to store
in
ISR memory.
2.
Press and hold [ISR] button for 2 seconds or
longer.
• Recalling a station with ISR
1.
In
any mode, press [ISR] button to turn
on
the radio function and tune the selected radio
station. "ISR" appears
in
the display. Press
[ISR] button again to return to the previous
mode.
*ISR is disabled when
2-Z0NE
is ON.
To Next Page
Loading...
