3
IMPORTANT NOTES
• ANY time any of the electronic connectors are unplugged or serviced,
electronic grease Clarke P/N 94822A (or equivalent) must be applied to the
connector pins prior to re-connecting the plugs. Failure to add the grease
could cause random signal lose between connectors. This grease is silica
thicken, medium viscosity, synthetic hydrocarbon grease for lubrication and
protection of tin-lead electrical connectors. Two manufactures are Syn-Tech-
NS-50040-GC and NYE- Nyogel 760G
•
To Next Page
Loading...
Need help?
General
