13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
FUNCTIONS
SWITCHING ON/OFF
1. Press the green ON/START (I)
button to start the bandsaw.
2. Press the red OFF/STOP (O) button
to stop the bandsaw.
NOTE: The blade may continue to
rotate for a short time before
coming to a complete stop.
UPPER BLADE GUARD ADJUSTMENT
1. Rotate the blade guard
adjustment knob:
• Clockwise to raise the blade
guard
• Anti-clockwise to lower the
blade guard.
NOTE: The blade guard should be
positioned approx. 3mm
above the workpiece the
blade is cutting.
To Next Page
Loading...
Need help?
General
