23
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAINTENANCE AND SERVICING
DAILY/AFTER USE
1. Keep the machine clean using a vacuum cleaner and wipe down with a
damp cloth.
2. Check the saw blade for missing teeth and cracks.
3. Open the top & bottom wheel covers and clean out all saw dust with a
vacuum cleaner.
MONTHLY
1. Open the lower and upper door and check the condition of the wheels,
tyres and blade.
• If required clean the tyres.
2. Using an air line (wearing goggles) blow out the motor casing.
TRANSPORTING THE BANDSAW
• Always transport the tool with
the blade guard in the fully
lowered position so the blade is
fully covered.
• Ensure both upper and lower
doors are locked closed.
• Due to the weight and height
when the saw is fixed to the
stand, it is recommended that
you detach the saw from the
stand when moving the machine.
WARNING: DO NOT USE GUARDS FOR HANDLING OR TRANSPORTATION
To Next Page
Loading...
Need help?
General
