3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SAFETY PRECAUTIONS
1. Keep work area clear
• Cluttered areas and benches invite injuries.
2. Consider work area environment
• DO NOT expose tools to rain.
• DO NOT use tools in damp or wet locations.
• Keep work area well lit.
• DO NOT use tools in the presence of flammable liquids or gases.
3. Guard against electric shock
• AV OI D body contact with earthed or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators).
4. Keep other persons away.
• DO NOT let persons, especially children, not involved in the work touch
the tool or the extension lead and keep them away from the work area.
5. Store idle tools
• When not in use, tools should be stored in a dry locked-up place, out of
reach of children.
6. DO NOT force the tool
• It will do the job better and safer at the rate for which it was intended.
7. Use the right tool
• DO NOT force small tools to do the job of a heavy duty tool.
• DO NOT use tools for purposes not intended.
• Dress properly, DO NOT wear loose clothing or jewellery, they can be
caught in moving parts.
• Non-skid footwear is recommended when working outdoors.
• Wear protective hair covering to contain long hair.
8. Use personnel protective equipment
WARNING: WHEN USING ELECTRIC TOOLS BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK AND PERSONAL INJURY INCLUDING THE FOLLOWING. READ ALL
THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS PRODUCT
AND SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
