4
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• Use safety glasses.
• Use ear protection
•Use gloves
• Use face or dust mask if working operations create dust
9. Connect dust extraction equipment
• The tool is provided with a connection for dust extraction and collecting
equipment, ensure these are connected and properly used.
10. DO NOT abuse the power cable
• NEVER yank the power cable to disconnect it from the socket. Keep the
power cable away from heat, oil and sharp edges.
11. Secure work
• Where possible use clamps or a vice to hold the work. It is safer than
using your hand.
12. DO NOT overreach
• Keep proper footing and balance at all times.
13. Maintain tools with care
• Keep cutting tools sharp and clean for better and safer performance.
• Follow instruction for lubricating and changing accessories.
• Inspect the tool power cable periodically and if damaged have it
repaired by a CLARKE service facility.
• Inspect extension cabling periodically and replace if damaged.
• Keep handles dry, clean and free from oil and grease.
14. Disconnect tools
• When not in use, before servicing and when changing accessories such
as blades, bits and cutters, disconnect tools from the power supply.
15. Remove adjusting keys and wrenches
• Form the habit of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
16. AVO ID unintentional starting
• Ensure switch is in the “off” position when plugging in.
17. Stay alert
• Watch what you are doing, use common sense and DO NOT operate
the tool when you are tired or under the influence of drugs or alcohol.
18. Check damaged parts
To Next Page
Loading...
Need help?
General
