EasyManua.ls Logo

Clarke Woodworker CS4-6C - ON-OFF Switch Operation and Safety; Switch Usage and Safety Lock

Clarke Woodworker CS4-6C
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Insert finger under switch lever and PULL
end of switch out.
3. To turn machine “OFF”... PUSH lever in.
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT COMES TO A COMPLETE STOP.
4. To lock switch in OFF position.., hold switch
IN with one hand... REMOVE key with
other hand.
WARNING: For your own safety, always lock
the switch “OFF” when machine Is not In use
... remove key and keep It In a safe place...
also... In the event of a power failure (all of
your lights go out) turn switch off.., remove
the key and store It remote from the machine.
ON-OFF Switch
The ON/OFF switch has a locking feature. This
feature is intended to help prevent
unauthorised and possibly hazardous use by
children and others.
1. To turn machine “ON’ insert key into
switch.
NOTE: Key is made of yellow plastic, located
in loose parts bag
.
14

Related product manuals