Clarke 07012A User Manual

Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco’s only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email: Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Clarke 07012A Specifications

General

Brand	Clarke
Model	07012A
Category	Sander
Language	English

Summary

Operator Safety Instructions

Introduction and Machine Specifications

How to Transport the Machine

Machine Set-Up

How to Operate the Machine

Sanding Cuts and Sandpaper

Sander Adjustment Procedures

Dust Shoe

Instructions for adjusting the dust shoe to improve particle recovery for fine or coarse sanding.

Leveling

Procedures for adjusting the machine leveling screw to balance sanding pressure on the drum.

Routine Maintenance

Sanding Chamber

How to clean the sanding chamber to prevent debris interference with the dust recovery system.

Wheels

Removing debris from truck and caster wheels to prevent surface waves on sanded areas.

Dust Bag

Proper methods for removing, cleaning, and maintaining the dust bag for effective dust collection.

Drive Belt

Inspecting drive belts for damage, broken cogs, or frayed edges indicating tracking issues.

Bearings

Schedule for relubricating and checking bearings for wear or damage according to usage.

Troubleshooting

Section II Parts and Service Manual

Assembly Drawing #1

Exploded view diagram illustrating the first assembly of the sander components.

Assembly Parts List #1

List of parts and their corresponding reference numbers for the first assembly drawing.

Assembly Drawing #2

Exploded view diagram illustrating the second assembly of the sander components.

Assembly Parts List #2

List of parts and their corresponding reference numbers for the second assembly drawing.

Wiring Diagram

Schematic showing the electrical connections and components of the sander.