Need help?Do you have a question about the Clarke CS4-6E and is the answer not in the manual?
Welcome message, product overview, and warranty details.
Lists all items included in the sander's box.
Details the first 14 essential safety guidelines for operation.
Covers remaining general safety rules and prohibitions.
Specific safety measures for belt and disc sanding operations.
Crucial safety warnings and wiring code for power connection.
Identifies key parts and features of the belt and disc sander.
Instructions for securely mounting the sander to a work surface.
Guide for attaching and adjusting the tilting work table assembly.
Steps to attach and secure the backstop to the sander.
How to connect a dust extraction system to the unit.
Step-by-step guide for removing and fitting new sanding discs.
Instructions for safely removing and installing sanding belts.
How to adjust the tracking knob for proper belt alignment.
Explains the function of the power buttons and reset mechanism.
Guide on positioning the belt for horizontal or vertical use.
Proper technique for sanding flat surfaces on the belt.
Method for sanding inside curves using the belt.
Technique for sanding outside curves using the disc.
How to use the mitre gauge for small surface sanding on the disc.
Routine cleaning and care instructions for the sander.
Detailed steps for replacing the drive belt and setting tension.
Lists key technical data and ratings for the sander.
Contact information for parts, service, and dealers.
Visual representation of all parts with numbering.
Comprehensive list of all parts with corresponding numbers.
Declares product compliance with EU directives and applied standards.
To Next Page
General
