Clarke ALTO C2K Series User Manual

Form No. 70152A 2/01 CLARKE TECHNOLOGY Printed in the U.S.A.
READ THIS BOOK
CAUTION: Read the Operator's Manual before using the appliance.
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If your
operator cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U. S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
C2K Series
120V
Polisher
Operator's Manual
Libro De Instrucciones
Manuel D’utilisation
E

Clarke ALTO C2K Series Specifications

General

Brand	Clarke
Model	ALTO C2K Series
Category	Sander
Language	English

Summary

READ THIS BOOK

OPERATOR SAFETY INSTRUCTIONS

Safety Definitions and General Warnings

Defines DANGER, WARNING, CAUTION and lists critical safety precautions for safe operation.

MACHINE INTRODUCTION

ACCESSORIES

MACHINE SPECIFICATIONS

PREPARING THE MACHINE FOR OPERATION

Installing Brush or Pad Driver

Step-by-step guide for attaching or removing brush or pad drivers.

Adjusting the Handle

Instructions for adjusting the machine's handle to the optimal operating position.

ELECTRICAL CONNECTION AND GROUNDING

Extension Cord Usage Guidelines

Specifies the requirements and limitations for using extension cords with the machine.

OPERATING THE MACHINE

Starting and Stopping Procedures

Details the steps for safely starting and stopping the polisher.

Controlling Machine Movement

Explains how to maneuver the machine for effective floor cleaning.

MAINTENANCE AND SERVICE

General Maintenance Instructions

Outlines the recommended service schedule and procedures for the machine.

Switch and Motor Maintenance

Covers specific maintenance tasks for the machine's electrical switches and motor components.

WIRING DIAGRAMS

PRODUCT SUPPORT AND WARRANTY INFORMATION

Authorized Service and Sales Locations

Lists contact information for ALTO's global product support branches and service facilities.

Limited U.S. Warranty Details

Outlines the terms, conditions, coverage, and limitations of the Clarke Technology Limited U.S. Warranty.