Need help?Do you have a question about the Clarke Woodworker CS4-6C and is the answer not in the manual?
General| Power | 370 W |
|---|---|
| Disc Diameter | 150 mm |
| Disc Speed | 2850 rpm |
| Table Tilt | 0-45° |
| Dust Extraction | Yes |
| Table Size | 225 mm x 160 mm |
Essential safety practices for operating the sander.
Warning to use only for sanding wood to avoid toxic dust.
Information on wiring connections, fuse rating, and plug safety.
Instructions for checking parts and safety before assembly.
Covers tools required, mounting methods, and initial component installations.
Details on table assembly, alignment, belt installation, tension, and tracking.
Overview of major controls and structural parts with their functions.
Instructions for operating the switch and using the safety lock feature.
How to perform bevel sanding and adjust the belt bed position.
Guidance on surface, end, and curved edge sanding.
Instructions for sanding curves and small surfaces on the disc.
Safety, lubrication, and belt installation for maintenance.
Diagnosing and fixing problems like motor failure, slow performance, or belt issues.
List of parts with descriptions, part numbers, and safety advice.
Information on product compliance with standards and directives.
To Next Page
