SPECIFICATIONS
Model No ..............................................CTS10C
Part No. ..................................................6500750
Motor .....................................................230V~ 50Hz 1ph
Power rating .............................. 1.4Kw
Speed ........................................4800 rpm
Fuse rating ................................. 13Amps
Saw Blade .............................................10” dia. - 5/8” bore (254x16mm) TCT
Maximum depth of cut........................75mm
Weight ................................................... 20.5KG
Noise level at operating position ........ 99dB LWA (Cutting 50mm soft wood)
Table dimensions .................................. 660x430mm (26”x17”)
Use of machine
This machine is designed to rip and cross cut wood exclusively, up to a maximum thickness
of 75mm.
For correct operation it must be fixed and operated as laid down in this manual.
This saw is intended for DIY, and hobby use ONLY.
Restrictions of use
This saw is NOT suitable for cutting:
• Timber greater than 75mm in thickness.
• Metal, Stone, Rubber, Plastic, Bones, Etc.
• Logs or round timber.
DO NOT use to rebate, tenon, mould or groove.
DO NOT fit any other tool or combination of blades.
DO NOT use as a free standing machine or as a hand held machine.
DO NOT modify the machine or its guards/controls in any way.
DO NOT use with any covers/guards removed.
3
To Next Page
Loading...
Need help?
General
