ClearSounds CSC600ER - Dialing Mode (Tone or Pulse)

22
Area settings
Dialing mode (tone or pulse)
When you place a call, the phone generates
numbers by tone or by pulse. By default, your phone
is set to the tone dialing mode.
Should you need to change this setting based on
your telephone service, use Tone for touch-tone
service or use Pulse for rotary dialing.
To select a dialing mode
1. Press beneath Menu on the screen.
2. Press and scroll down to SetPhone, and
then press .
3. Press and scroll up to DialingMode, and
then press .
4. Press and scroll to your selection, and
then press .
5. Press until you arrive at the home
screen.