ClearSounds CSC600ER - Remote Monitoring Security ID; Change Security ID Code

59
Security ID for remote monitoring
The security ID code is used only with the remote
monitoring feature.
If you turn on remote monitoring, you must give
remote monitoring helpers one of these security ID
codes:
• 0000 (the phone’s default security ID code). It is
not necessary to set this code.
• A different 4-digit code that you must set.
Carefully consider changing the default code.
The default code is always readily available.
To change the remote monitoring security ID code
1. Press beneath Menu on the screen.
2. Press and scroll down to SETSOS, and
then press .
3. Press and scroll down to
SecurityID, and then press .
4. Press the numeric keys to enter the new 4-digit
code, and then press . .
5. Press until you arrive at the home
screen.