ClearSounds CSC600ER - Turn Remote Monitoring On;Off

58
Set remote monitoring
3. Approximately every two minutes, you hear two
tones. You must press any numeric key to keep
the line open.
Note: If I (the monitored party) press ,
the line remains open without your input.
Turn on or off remote monitoring
1. Press beneath Menu on the screen.
2. Press and scroll down to SETSOS, and
then press .
3. Press and scroll down to
RemoteMonitor, and then press .
4. Press and scroll to
ON or OFF, and then press .
5. Press until you arrive at the home
screen.
If you turned on remote monitoring, your remote
monitoring helpers require your security ID code.
Please see “Security ID for remote monitoring”
on page 59.