Section 4 — System Configuration Hawk 1000
4-8 Part No. 750-366
Figure 4-8. System configuration
In this example, “Firetube” is selected as the boiler type. After selecting the boiler media (steam or hot water)
additional screen buttons will become available. Selecting “Steam” will bring up buttons for steam transmitter
span, safety valve setpoint, and NOx level. To change the default values, press the desired button and a keypad
will appear allowing user input.
Selecting boiler type and media will also bring up the <Next> button, allowing the user to advance to the
next configuration screen.
The user must be logged in at the appropriate password level to change configuration data. If the user tries to
change configuration data without having proper access rights, a pop-up window will appear and a password
will be requested.
Figure 4-9. Media selected
To Next Page
Loading...