Clevertouch CTL-55DS4KV - Page 27

English - 26 -
System Menu Content
Language
Sets the OSD menu language preference.
Date/Time
Sets date and time.
Sources
Enables or disables selected source options. There will be RegularEnhanced and
DisabledRegular
and Enhanced󰀨
To be able to watch 4K images from an HDMI source related source setting should be
set as Enhanced if the connected device is HDMI 2.0 compatible. Set as Regular if
the connected device is HDMI 1.4 compatible. Set accordingly or disable the related
HDMI source by setting as Disabled.
Note: HDMI cables which are longer than 5 metres and which are not HDMI certied can cause display
problems. We recommend using a certied Premium High-Speed HDMI Cable. Source device, connection
cable quality and other HDMI equipments used may aect performance.
Please refer to → https://www.hdmi.org/consumer/nding_right_cable.aspx (for nding the right cable)
https://www.hdmi.org/installers/longcablelengths.aspx (for cable lengths)
More
Displays other setting options of the Display.
Menu Timeout
Changes timeout duration for menu screens.
Standby Led
Enables or disables the functionality of the standby led. If disabled the led will not function.
Software
upgrade
Displays current software version. Press OK to see the upgrade options. You can use
these options to start a manual search for software updates and set your automatic
scan preference.
Auto Display
OFF
Sets the desired time for the Display to automatically go into standby mode when not
being operated.
Audio Video
Sharing
(Optional)
Audio Video Sharing           
tablet pc. If you have a compatible smartphone or tablet pc and the appropriate software

software for more information.
Video Wall
Settings
Press OK to open the Video Wall Settings menu screen. Video Wall Settings Row
Count, Column Count, Cell and 󰀨 options are available.
CEC
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
CEC Auto Power
On
This function allows the connected HDMI-CEC compatible device to turn on the Display
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.
Quick Standby
If this feature is enabled the Display can be turned on again 
commands 󰀨Left or Right button to enable or disable
the feature.
DP Stream
Setting (*)
Sets the DisplayPort stream type. MST and SST options are available.
(*) This menu item appears only when the input source is set to DP.
USB Auto Play
Using this option you can set your Display to start playing the media content installed
on a removable device automatically. Refer to USB Auto Play Feature section for
detailed information.