Clevertouch CTL-55DS4KV - Page 41

English - 40 -
VIDOFF 󰀨 no parameter 󰀨
VIDON Select video on. no parameter Video on.
GETVIDSTATE Get video state. no parameter
#*video is on
or
󰀨
TIME
Display the current date
and time.
no parameter Time = ...
SETTIMEMODE Set time mode 
#*set time mode to n
or
#*invalid input type
or
#*can not set time mode
GETTIMEMODE Get time mode no parameter
#*time mode is n
or
#*can not get time mode


RTCSET Set/Query RTC clock optional integer parameter
First outputs the current RTC
elapsed seconds in decimal and
hex format:
#*RTC time is 200 0xc8
If a non-zero parameter is

seconds(assumes parameter
is a UTC time) and outputs the
following:
#*RTC set time to 255
󰀨
SETRTCDATE Set/Query RTC date


< MM < 13)
Example: SETRTCDATE
20:12:2016
#*RTC Date is set to ...
or
#*Wrong argument format use
SETRTCDATE DD:MM:YYYY
or
#*Invalid month
or
#*Invalid day
GETRTCDATE Get RTC date no parameter #*The RTC date is ...
MENUTIMEOUT Set menu time out mode.


#*set menu timeout mode to OFF
or
#*set menu timeout mode to 60
or
#*Invalid menu timeout mode
GETMENUTIMEOUT Get menu time out mode no parameter
#*menu timeout mode is OFF
or
#*menu timeout mode is n
or
#*can not get menu timeout mode

60)
GETSTANDBY 󰀨 no parameter
󰀨
or
#*standby on
STARTFTI
Start First Time
Installation by presenting
FTI dialog just as it does
when FTI is triggered
from menu by the user.
no parameter #*FTI was initialising.