English - 45 -
SETWIFIAPSECURITY-
TYPE
sets the security type of
access point. The value
insensitive)
#*Error! Security Type can not be
changed when Access Point is
active
or
#*Error! Security type parameter
should be given
or
#*Error! Security type parameter
is invalid
or
#*Security Type is set to (<TYPE>)
succeeded
GETWIFIAPSECURITY-
PASSWORD
returns the password of
access point
no parameter
is (<PASSWORD>)
SETWIFIAPSECURITY-
PASSWORD
sets the password of
access point. Password
must be maximum 64
characters
string n (example:
#*Error! Security Password can not
be changed when Access Point
is active
or
#*Error! Password length should
be between 8 and 63 characters
or
(<PASSWORD>) succeeded
GETWIFIAPSTATE
returns the access point
no parameter
SETWIFIAPSTATE
sets the access point
state. State should be
string is case insensitive)
#*Error! Access Point state
parameter is invalid
or
#*Access Point state is already
(<STATE>)
or
succeeded
GETWIFIAPCHANNEL
returns the stored
access point
no parameter
is (<channel>)
SETWIFIAPCHANNEL
sets the channel of the
n (integer channel) -
(Channel number should
be valid for current country.
If invalid channel number
is given all valid channel
numbers will be listed.)
(<channel>) succeeded
or
(<channel>)
or
#*Error! Invalid channel. Available
channels for your country
(<country name>) are: <all
available channels separated with
space>
GETWIFIAPTXPOWER
access point
no parameter
<tx-power>
SETWIFIAPTXPOWER
access point.
n (integer tx power in dBm) -
should be in the range of 0 -
20 dbm (0 for default value)
power>) is successful.
or
to (<tx-power>)!
or
TX Power (<tx-power>)! TX Power
should be in the range of 0 - 20
dbm (0 for default value)
or
TX Power (<tx-power>)!
To Next Page
Loading...
