Clevo P151SM-A - Disassembly - Hard Disk Drive Installation; Procedure for HDD Installation

Disassembly
Inserting the Hard Disk Into the HDD Bay 2 - 9
2.Disassembly
Inserting the Hard Disk Into the HDD Bay
1. Make sure the HDD assembly is aligned with the black taped area (
Figure 5a).
2. When aligned, carefully insert the HDD assembly into the case so that the connectors line up (
Figure 5a).
3. Replace the hard disk bay covers and screws.

2. HDD Assembly
Figure 5
Inserting the Hard
Disk Into the HDD
Bay
a. Make sure the HDD as-
sembly is aligned with the
black taped area. When
aligned, carefully insert
the HDD assembly into
the case so that the con-
nectors line up.
1
6
2
1
1
a.
2