Modules & Options
6 - 6 SATA Mode Setup (Optane™, RAID or AHCI)
6
1. Start up your notebook computer and press <F2> to enter the BIOS and go to the
Setup Utility.
2. Select the Advanced menu.
3. Select SATA Mode (see page 5 - 15), press <Enter> and select “Intel RST
Premium With Intel Optane Acceleration” and select <OK>.
4. Press <F10> to “Save and Exit” and select <Yes> .
5. As the computer restarts press <F2> to enter the BIOS again and go to the Setup
Utility.
6. Go to Intel(R) Rapid Storage Technology (Advanced menu) and select “Create
RAID Volume”.
Figure 6 - 1
Create RAID Volume
To Next Page
Loading...
