User Setup: Setpoints
21
Setpoint Limits (Setup Step 13)
When this feature is set to ON, the Heat and Cool
Setpoints may be restricted to preset levels in Setup
Steps 14 and 15.
Maximum Heat Setpoint (Setup Step 14)
Minimum Cool Setpoint (Setup Step 15)
Force Schedule On
This feature is available when the thermostat is connected to
Skyport Cloud Services and may only be accessed through Skyport.
This security feature is not accessible locally at the thermostat.
When this setting is enabled; pressing the OVERRIDE or MODE
buttons on the thermostat will have no effect.
This feature is often used in conjunction with setpoint limits.
Available Modes (Setup Step 16)
This setup step may restrict the use of this
thermostat to: Heat only, Cool only, or Heat
and Cool.
To Next Page
Loading...
Need help?
General
