To Next Page

To Previous Page

User Setup

Skyport (Setup Step 38)

If set to ON, the thermostat may

communicate and receive data from the

Skyport Cloud Services.

API (Setup Step 39)

Turning on the local API allows 3rd party

software to interface with the thermostat

such as a home automation system.

Time API (Setup Step 40)

Only appears when prior step for Local API

is set to ON. This step allows the internal

clock to be altered using the API.

NOTE: It is permissable to enable both

Skyport and the local API at the same time.

ClimateMaster AVB32V02R User Manual

Questions and Answers: