2
Before You Begin
This product is intended to be installed by
trained service professionals.
This manual explains the procedures for
installing the ClimateMaster iGate
™
Connect
thermostat. Please read it carefully before
beginning the installation.
For information on how to operate the
ClimateMaster iGate
™
Connect thermostat,
please see the iGate
™
Connect Thermostat User
Manual.
The iGate
™
Connect thermostat is designed to
be mounted on the homeowner’s wall in a
convenient location.
Caution: Disconnect electric power to the HVAC
system before installing this product. Failure
to do so could result in electric shock and/or
equipment damage.
All wiring must conform to your local electrical
code.
Mercury Notice: This product does not contain
mercury. If you are replacing a product that
does contain mercury, contact your local
waste–management authority for disposal
instructions. Do not discard the old product in
the regular trash.
!
ecobee
OK
MENU BACK
To Next Page
Loading...
