CLIVET EVH-X SPACE 3.1 User Manual

45
EVH-X SPACE 2.1 - 12.1
M0SM10N17-03
9 CONTROL
UNIT STATUS
During the operation is possible to visualize the unit status by the values obtained from sensors and from
the main unit operating parameters.
N. Description U.M.
1 Current set point °C
2 Operative T return °C
3 Return Temperature I/O °C
4 Return Temperature from sensor thermostat °C
5 Input water Temperature source I/O °C
6 Output water Temperature source I/O °C
7 Exchanger Temperature treatment coil utility I/O °C
9 -
10 High/low Pressure bar
11 -
12 Thermal load to the source °C
13 -
14 -
15 -
16 -
17 -
18 Modulating fan output Out %
19 Modulating compressor output Out %
20 Source water valve output Out %
21 Digital input status bitmap-byte
22 Digital output status bitmap-byte
23 Compressor 1 starts bitmap-byte
24 Compressor 1 hours bitmap-byte
25 Unit hours in ON bitmap-byte
26 Topographic map of the nodes connected in the mininet bitmap-byte
27 Filter timer days
28 1 alarms log numeric
29 2 alarms log numeric
30 3 alarms log numeric
31 4 alarms log numeric
32 5 alarms log numeric
- Not used

CLIVET EVH-X SPACE 3.1 Specifications

General

Brand	CLIVET
Model	EVH-X SPACE 3.1
Category	Air Conditioner
Language	English