CLIVET SCHIARA 2 User Manual

22
Use
3.4.1 Other functions
– Automatic restart
If the power supply to the unit is interrupted, the
unit will automatically restart with the last settings
when it is restored.
– Heating in harsh climates
The sophisticated inverter technology can operate
eciently even in extreme weather conditions. A
comfortable indoor climate can be obtained even
with an outdoor temperature of -30°C.
– Cooling in harsh climates
The external fan speed can be changed according
to the temperature of the condenser and the air
conditioner can work without any problems even
at a temperature of -15°C.
– Breeze Away
The optimized air outlet design enlarge the air
flow angle , so that you can enjoy an evener
comfortable cooling than before.
The enlarged deflector blow the cooling airflow
upward avoiding direct air flow blowing on the
body.
– Active Clean function(
The Active Clean Technology washes away
dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A “pi-pi” sound will be heard. T h e
Active clean operation is used to produce more
condensed water to improve the cleaning eect,
and the cold air will blow out. After cleaning, the
internal wind wheel then keeps operating with hot
air to blow-dry the evaporator, thus keeping the
inside clean.
When this function is turned on, the indoor unit
display window appears “CL ” , after 20 to 130
minutes, the unit will turn o automatically and
cancel Active Clean function.
For some units, the system will start hightemperature
cleaning process, and the temperature of air outlet
is very high. Please keep away from it. And this
would lead to the rising of the room temperature .
– Cascade function
With the newly improved volute casing design, the
air duct can rotate 180 degree, which brings faster
and stronger cooling and heating eect. The hot
air can blow vertically, warm your feet and whole
room quickly.
– WiFi Control
WiFi control allows you to control the air
conditioner through your mobile phone and a
wireless connection.
– Memory of the ventilation slits angle
When the unit is turned on, the ventilation slits
automatically return to the last set angle.
– Detection of refrigerant leaks
The indoor unit automatically displays "EC" when it
detects a refrigerant leak.
l
WARNING
For a detailed explanation of the unit's
advanced features (such as TURBO mode and
self-cleaning functions), refer to the Remote
Control Manual.
SLEEP FUNCTION
The SLEEP function is used to reduce energy consumption
while sleeping (when a constant temperature setting is
not required for a comfortable climate). This function can
only be activated with the remote control.
Press the SLEEP button when you are ready to go to bed.
In Cooling mode, the unit will increase the set temperature
by 1°C after 1 hour and again by 1°C after another hour. In
Heating mode, the unit will lower the set temperature by
1°C after 1 hour and again by 1°C after another hour.
The new temperature will be maintained for 5 hours, then
the unit will automatically switch o.
±1°C
1 h 1 h
±1°C
FUNZIONE SLEEP
Temperatura
impostata
Timer di
spegnimento
dopo 7 h
Set
temperature
SLEEP FUNCTION
Energy saving during sleep
Switch-o
timer after 7h
Fig. 20
Note: The SLEEP function is not available in Ventilation or
Dehumidification mode.

CLIVET SCHIARA 2 Specifications

General

Brand	CLIVET
Model	SCHIARA 2
Category	Air Conditioner
Language	English