CM 653 Series - Description; Specifications

2 P/N 53855 (653-D) Rev AA May 2015
SERIES 653
ENGLISH
DESCRIPTION
Series 653 Hand Operated Lever Hoists are highly versatile tools that can be used in any position to efficiently pull, lift, drag or stretch.
The frame, covers and lever are made from steel stampings. The gears are heat treated steel, upper and lower hooks are forged steel and
the chain is heat treated, welded link type.
Hoist with load ratings of 3/4, 1, 1½, 2 and 3 ton are available and this manual applies to all of these units. The hoists are available with 5,
10, 15 and 20 foot long chains.
Hooks with latches are standard on all units.
Series 653 Hand Operated Lever Hoists are built in accordance with the specification contained herein and at the time of manufacture
complies with the applicable sections of the American Society of Mechanical Engineers (ASME) Standard B30.21: Manually Operated
Lever Hoists.
SPECIFICATIONS
Model
No.
Load
Rating
(tons)
Lift or
Reach
(ft.)
Lever Pull
to Lift
Rated Load
(lbs.)
Net
Weight
(lbs.)
Dimensions (in.)
A B C D E F G H J K L
5310
5311
5312
5313
3/4
5
10
15
20
45
15.0
15.8
16.6
17.3
12-5/8 15/16 1-1/8 11/16 9-1/4 4-3/8 2-3/16 2-3/16 5-15/16 2-3/8 3-9/16
5328 1 5 60 15.0 12-5/8 15/16 1-1/8 11/16 9-1/4 4-3/8 2-3/16 2-3/16 5-15/16 2-3/8 3-9/16
5315
5316
5317
5318
1-1/2
5
10
15
20
79
27.0
31.4
35.8
40.2
14-13/16 1-1/8 1-1/4 13/16 13 4-3/4 2-3/8 2-3/8 6-7/8 3 3-15/16
5329 2 5 105 27.0 14-13/16 1-1/8 1-3/8 13/16 13 4-3/4 2-3/8 2-3/8 6-7/8 3 3-15/16
5320
5321
3
5
10
90
45.0
52.3
18-11/16 1-11/16 1-9/16 1-1/4 15 7-1/2 3-3/8 4-3/16 7-7/8 3-3/8 4-9/16
5330
5331
5332
5333
6
5
10
15
20
90
78.0
94.0
110.0
126.0
23-1/4 1-13/16 2-3/16 1-1/2 15 7-1/2 3-3/8 4-3/16 7-7/8 3-3/8 4-9/16
Figure 2 - Specifications
A
B
B
F
G
H
C
C
J
K
L
D
E
D