CMC S19 User Manual

MAN. 126 rev.4 Use and maintenance manual S19 58 of 77
negative r
e
sult
of the checks:
Check for
splits
,
cracks
,
rust
on the
structure of the MEWP
Forbidden
to use the
MEWP. Contact
the Servicing .
CMC
Check that safety devices
(emergency buttons, inter-block
system for stabilizers-booms) work
properly
Forbidden
to use the
MEWP. Contact
the Servicing.
CMC
Check that controls, warning
lights, Red emergency stop buttons
work properly
Forbidden
to use the
MEWP. Contact
the Servicing.
CMC
Check condition of the
cable
leaf/lifting chains
Forbidden
to use the
MEWP. Contact
the Servicing.
CMC
Check the safety locks/
blocking
systems (pins, locknut, etc.) are in
proper condition and not damaged
Forbidden
to use the
MEWP. Contact
the Servicing.
CMC
Checks by USER.
In case of
negative result
of the checks: Service by
Check
condition of hoses and
tubing, hoses/pipe fittings and
hydraulic circuit components: check
for hydraulic fluid leakage in hydraulic
components.
Replacement. USER/
CMC
Check clearance of
microwitch
contacts are not out of adjustment
Restoration of the
contacts
USER/
CMC
Check for any loose cables, cables
been pulled, kinked hoses , damaged
or hoses being crushed.
Forbidden
to use the
MEWP. Contact
the Servicing.
CMC
6.2 

 Weekly maintenance schedule (or every 40
hours)


Operations
Service by
Check for damage,
splits
,
cracks
,
rust
on the chassis
structure of the MEWP (use a spotlight or flashlight to
inspect the internal parts or under frame)
USER / CMC
Check and inspect combustion engine
air filter, for
cleanliness and that it is free of obstructions. Check
electric motor for cleanliness and obstructions.
USER / CMC
Check
hydraulic filters for cleanliness.
USER / CMC

CMC S19 Specifications

General

Brand	CMC
Model	S19
Category	Lifting Systems
Language	English