USB MIDI Master Keyboard
12
Play the instrument
When no LED lights for “FADER FUNC.” button, faders function list:
Function M.Vol Vol.1 Vol.2 Vol.3 Vol.4 Vol.5 Vol.6 Vol.7 Vol.8
Channel ALL 1 2 3 4 5 6 7 8
Controller# M.volume 7 777777 7
Default 127 100 100 100 100 100 100 100 100
Value range 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127
When upper LED lights for “FADER FUNC.” button, faders function list:
Function M.Vol Vol.9 Vol.10 Vol.11 Vol.12 Vol.13 Vol.14 Vol.15 Vol.16
Channel ALL 9 10 11 12 13 14 15 16
Controller# M.volume 7 777777 7
Default 127 100 100 100 100 100 100 100 100
Value range 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127
When lower LED lights for “FADER FUNC.” button, faders function list:
(You can assign each faders to different controller #)
Function CS0 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8
Channel - - - - - - - - -
Controller# 11 11 11 11 11 11 11 11 11
Default 127 127 127 127 127 127 127 127 127
Value range 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127
2.9 Transpose (TRANSPOSE)
By using the transpose function, you can transpose the keyboard
by semitones.
2.9.1 Push TRANSPOSE button, then you can use Data dial or
DEC/INC button to change the transpose value.
2.9.2 The default value for transpose is 00, and the value range is -
12 12(One octave up or down).
2.10 Octave shift (OCTAVE)
By using the octave shift function, you can transpose the
keyboard by octaves.
2.10.1 Push OCTAVE button, then you can use Data dial or DEC/
INC button to change the octave value.
2.10.2 The default value for octave is 00, and the value range is -3
3(three octaves up or down).
Hint:
If the shifted note exceeds MIDI key range, the exceeded note will not
To Next Page
Loading...
Need help?
General
