USB MIDI Master Keyboard
14
Advanced functions
2 After new controller number is assigned, release KNOB
FUNC. button.
Hint
For detail about assignable controllers, refer to appendix 5.1
When the LED indicator for “KNOB FUNC.” does not light, knobs function list:
Knob Func CUTOFF RESONANCE ATTACK RELEASE PAN REVERB CHORUS TEMPO
Controller# 74 71 73 72 10 91 93 -
Default 64 64 64 64 64 40 0 120
Value range 0-127 0-127 0-127 0-127 0-127 0-127 0-127 20-250
Hints:
1.If your external device does not support TEMPO message or is not set up
properly, the TEMPO knob will not work.
2.The TEMPO range is 20-250.
When the LED indicator for “KNOB FUNC.” lights, knobs function list (You can
assign each knobs to different controller #):
Knob Name KN1 KN2 KN3 KN4 KN5, KN6, KN7, KN8
Knob Func Expression Breath BANK MSB BANK LSB Expression
Controller# 11 2 0 32 11
Default 127 127 0 0 127
Value range 0-127 0-127 0-127 0-127 0-127
3.3 Send initializing sysx
3.3.1Send GM on message (GM ON)
Push DRAWBAR and V.CURVE at the same time, the key-
board will send sysx for GM on (F0 7E 7F 09 01 F7).
By sending GM on message, you can make GM initializing for
General MIDI compatible tone generators.
3.3.2 Send XG on message (XG ON)
Push PROGRAM and TRANSPOSE at the same time, the
keyboard will send sysx for XG on (F0 43 10 4C 00 00 7E 00 F7).
By sending XG on message, you can make XG initializing for XG
compatible tone generators.
3.3.3 Send GS on message (GS ON)
To Next Page
Loading...
Need help?
General
