22
8 The MASTER Mode
8.1 General Description
8.1.1 User Bank Of VX
Below you will see the functions available in the MASTER mode. All the related
settings and information can be stored in the USER BANK of your VX.
MIDI keyboard with good touch response
8 Favorite Folders in F1-F8 buttons
MIDI Controllers by pads, motorized faders and encoders
Function similar to MIDI Motion Sampler by the AUTOMATION button
STYLE SEQ buttons for the sequencer function
ZONE button for keyboard splitting
PERFORMANCE button for scales and temperaments
Multiple expansion boards. (including audio, voices, etc…)
All the VX panel buttons and other control parts (except for the U-CTRL button) are
available in the MASTER mode. You can assign a function to any one of the control parts,
and save all the related settings to the USER BANK, including the 8 favorite folders in the
F1-F8 buttons.
The favorite folders are designed for use with selecting voices, playing voices and
controlling voices, thus most of the parts settings are saved to F1-F8 favorite folders.
However, settings for pads, motorized faders and encoder knobs will not be saved to the
favorite folders, instead, they will be saved to the USER BANK. In this way, we can use
the pads, faders and encoders as a separate set of MIDI CONTROLLERS.
In fact, VX can be seen as the combination of a MIDI keyboard and a controller. In
the stage, you can use the MIDI keyboard section for voice navigation, and at the same
time you can use the controller section for track manipulation. The two sections work
together and will not interfere with each other.
Anyway, if you would like, you can set the same MIDI port/channel for encoder knobs
and faders as for one of the favorite folders, then you can use the two sections to control
the voice.
Other settings in the MASTER mode will not be saved to the favorite folders either,
so the content in the USER BANK can be divided into the below items:
Parts related to the favorite folders, including: F1-F8 buttons, keyboard,
aftertouch, potentiometer knobs 1-8, pitch bend wheel, modulation wheel, ribbon
controller, pedals, and breath controller. So the port/channel settings in F1-F8
buttons will also work for those parts.
To Next Page
Loading...
Need help?
General
