40
Press the Play button to start playing the fader movements.
Use the encoder#9 to adjust the playing tempo.
Playing goes repeatedly until the Stop button is pressed.
z Hints for AUTOMATION:
Hint1: First assign fader1 to control the Wah effect, then record the movement of fader1.
After that you can play the keyboard along with the fader movement.
Hint2: Assign fader2 to control the volume of the Wah effect, then record the movement
of fader2. After that you can play the keyboard along with the fader movement.
Try the above hints and enjoy.
8.4.5 The STYLE SEQ Button
Notes for the STYLE SEQ function:
z In the STYLE SEQ function, you can use pads and/or SEQ buttons to play a song,
and at the same time you can also play the keyboard.
z Press the STYLE SEQ button for its display. Press it again to quit to the F1-F8
display.
z In the STYLE SEQ display, you can also press the F1-F8 button or other MENU
buttons to quit.
z The MIDI file played in the STYLE SEQ function will only be sent to VX MIDI OUT1,
USB MIDI OUT1 and the expansion board.
z When a MIDI file is being played, all the auto-displays are disabled.
z When playing stops, auto-display for faders, potentiometer knobs and encoder knobs
works.
z During STYLE SEQ playing, only auto-display for potentiometer knobs and encoder
knobs works, auto-display for faders and the other parts is disabled.
z During SEQ stop and playing, if there is no part movement, the LCD will go to the
first page of the STYLE SEQ display.
8.4.5.1 Song Select
z Press the STYLE SEQ button and you will see the first page of the display, then you
can select a song and adjust related settings:
S o n g : 0 0 - D e m o 1
T e m p o : 1 2 0 4/ 4 →
To Next Page
Loading...
Need help?
General
