CNC 6040 Router / Engraver System
CNCDIY CNC Routing Machines System User’s Manual
5
Contents
Chapter 1 Introduction 4
Chapter 2 Safety and Protection 4
2-1 Gloves 4
2-2 Handling Posture 4
Chapter 3 Hardware Installation 7
3-1 Installation Precaution 7
3-2 Understanding of Your Machine System 8
3-3 Machine Specifications 9
3-4 Spindle (D57 and C57) Specifications 10
3-5 Stepping Motor Specifications 11
3-6 Components Check 12
3-7 Tools and Materials Requirement 13
3-8 Machine Installation 15
3-9 Electrical Connection 20
3-10 Basic Testing with CNC Control Box 25
Chapter 4 Installation of Mach 3 Software 27
4-1 Connect to the CNC Control Box 27
4-2 Basic Setting of Mach 3 software 27
4-3 Stepping motor setting in Mach 3 with different coupling type 32
4-4 Load a G code file 34
4-5 Testing with CNC machine 35
Chapter 5 Installation of EMC2 Software 36
5-1 Connect to the CNC Control Box 36
5-2 Basic Setting of EMC2 software 36
5-3 Stepping motor setting in EMC2 different coupling type 39
Chapter 6 Test Your System 42
To Next Page
Loading...