CNC 6040 Router / Engraver System
CNCDIY CNC Routing Machines System User’s Manual
9
3-3 Machine Specification
CNC6040 Router / Engraver System
1. Effective Travel: 400mm(X) * 580mm(Y) * 60mm(Z)
2. Machine Outside Dimensions: 850mm * 640mm * 470mm
3. Maximum Workpiece
Dimensions:
750mm*480mm*90mm
4. Working Table Dimensions: 750mm*480mm*20mm
5. Sliding Units:
i) X Axis Dia. 16mm Guide
ii) Y Axis Dia. 20mm Guide
iii) Z Axis Dia. 13mm Guide
6. Driving Units: New Ball Bearing (BB) 1605
7. Coupling Plum Coupling / Simple Coupling
8. Stepping Motor Type: 57 Two-Phase 1.45A~2A (New)
9. Main Materials of Machine Aluminum Alloy 6061
10. Actual carving precision: 0.08mm (carving different hardness materials vary)
11. Repeat positioning accuracy: 0.06mm
12. Engraving speed: 0 ~ 2000mm/min
13. Machine weight: 53KG (excluding packaging)
14. Acceptable Processing
materials
PVC, PCB, Plastic, Woods, Brass and Aluminum
Driving Units
The diffient type of driving units are using on X, Y and Z axis for the smooth driving unit! The
basic information is shown below:
Model Ball Bearing Screw
Axis Name
X Y Z
Diameter(mm)
16 16 16
Pitch(mm)
5 5 5
To Next Page
Loading...