CNC 6040 Router / Engraver System
CNCDIY CNC Routing Machines System User’s Manual
6
Chapter 1 Introduction
Thank you for your selection of our product. We have provided CNCDIY routing machine
system, also very honored that you have the time to read, prepared by the Walter, "Quick Start
Guide" in the hope of its initial contact with routing machine will be able to help! This is not a
company. We are formed from some CNC lovers in different Places and hope provide some low
price and high quality DIY CNC machines for you!
We hope to provide some low price and high quality DIY CNC machines for you! All of our
machine set are included a CNC Machine body with 3 Stepping Motors, a CNC controller, a 24V
Switching Power Supply and a Driller. Each machine set is installed completely and pass testing
before shipping, users can use the machine immediately when received.
Chapter 2 Safety and Protection
Before you open the packages and check the machine parts, please care about the following
items
2-1 Gloves
Your hands are easy hunt by the sharp edges of the parts and the
packages. The Gloves can reduce the risk for your hands!
2-2 Handling Posture
Some of parts are heavy, when you move or put up them, please be careful and take care you
body with good Handling Posture
“LIFTING - PUSHING - PULLING – LOWERING”
To Next Page
Loading...