CO/Tech FT-0205 - Sensor Operation Checks

10
ENGLISH
Battery operation
1. Press in thecatch and remove thebatterycover.
2. Insert 3×AAA/LR03 batteries. Notethepolarity markings in
thebattery compartment to ensure correct insertion.
3. Refit thebatterycover.
Mains operation
• Connect themains adapter to theDC6.0 V
input socket and to a230 V mains electricity
socket. ACON will be appear on thedisplay
screen for 3 seconds.
• If themains adapter is disconnected and
theweather station goes over to battery
operation, AC OFF will appear on thedisplay
screen.
- Remember to unplug themains adapter
from thewall socket during heavy thunder
storms to protect theweather station.
Scanning for the outdoor unit sensors and
checking their operation
As soon as theindoor unit is switched on, it will begin to scan automatically for any
sensors in thevicinity. Thescan will be indicated by the lightingup.
Whenthesymbol is no longer illuminated, theoperation of thesensor can be tested.
Information
If during thescan theindoor unit can’t find, or loses contact with theoutdoor unit “--.-”
will appear on thedisplay. Tryscanning for thesensors manually:
In normal display mode, hold in [ CHANNEL/+ ] for 3 seconds. “ ” will appear on
thedisplay.