CO/Tech FT-0205 - Software Integration; Software Installation and Usage

25
ENGLISH
Software (WeatherHome)
With thesoftware Weather Home you can use acomputer to view measurement data
in real-time, set theindoor unit, set alarms and clear themax/min readings.
System requirements
Computer PC with CD reader and available USB port
Operating system Windows NT4 (Service Pack >= 6a), Windows 2000,
Windows XP, Windows Vista, Windows 7–10
Processor Pentium III 500 MHz or higher
Memory Minimum 128 MB, recommended 256 MB
Installation
1. Connect theincluded USB cable to avacant
USB port on your computer and to theUSB
connection (18) on theindoorunit.
2. Make sure that you have administrator rights for
theoperating system.
3. Insert thesupplied CD into your computer
CDdrive. Iftheinstallation does not start
automatically: open theFile Explorer file manager,
localise theCD and run “WeatherHome.exe”.
4. Follow theinstructions in theinstallation program and install WeatherHome.
Instructions for use
Open theprogram called WeatherHome.
• The main page shows current
readings and histograms.
• Display or hide graphs by clicking
on thenames above thegraphs.