Coban GPS303F - Location Based Service (LBS); Cell-ID Locating; Voice Monitor; Data Logging

Guangdong, china. e.g. address123456
6.13 Location based service (LBS) / Cell-ID Locating.
If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID
GSM locating, Location reports will include the GPS coordinates of the last known
positions as well as a LAC code, Entering the LAC code to the “Manual Track” menu of
web tracking platform www.gpstrackerxy.com will enable you to see the tracker’s current
location. You can also send command “address+password” to the tracker to request exact
address, track will automatically switch to tracking by LBS in GPRS mode. Accuracy of
LBS depends on the distance to the nearest GSM Network Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of
GSM network. It may not be available in some areas.
6.14. Voice Monitor
6.14.1 The command to switch between Track and Monitor mode are
“tracker” and “monitor”.
6.14.2 The default mode is “track” (Track mode).
6.14.3 Send SMS “monitor+password” to the unit, and it will
reply“monitor ok!” and switch to “monitor” mode.
6.14.4 Send SMS “tracker+password” to the unit, it will reply “tracker
ok!” and restore to “track” mode.
6.15.Data logging
6.15.1 When the tracker devices lost GSM signals or fall offline from GPRS, tracker
will store the tracking position and alerts automatically upon the pre-set condition,
when GSM signals get back, all the event alerts will be auto-sent to the authorized
numbers or monitoring platform (server), but the stored tracking data should be
loaded to the monitoring platform via SMS command.
6.15.2: Storage upon times: Send SMS: “save030s005n+password” to the tracker unit,