EasyManua.ls Logo

Coban GPS303F - No Sleep Mode; Start Work on Specific Time; Check IMEI; Set up Terminal (Local) Time

Coban GPS303F
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.29.4 No sleep mode
Send SMS command”sleep+password+space+off” to tracker device ,
tracker will reply”sleep off ok”. Tracker GSM,GPS,LED will work
without sleep .This mode is the default mode. e.g. sleep123456 off
6.30 Start Work on specific time
Send "schedule+password+space+1h"to tracker , it will awake every one
hour and send geo-info(m:minute,h:hour,d:day) . The time interval is in 3
digits at most and should be less than 30days .GSM & GPS module shut
off , trackers work under low power consumption mode . Neither calling
nor SMS can awake tracker device .Track will be awaken by alarms and
enter to this mode after alarms are deactivated. e.g. schedule123456 1h
6.31 Check IMEI
Send SMS command "imei+password" to the unit. E.g. Send SMS
command "imei123456" to the tracker device, an IMEI number in 15
digits will reply to your cell phone.
6.32 Set up Terminal (local) Time
6.32.1 Send SMS command time+space+zone+password+space+time”
to the tracker unit, If succeed, It will replytime OK
6.32.2 For example: Send SMS “time zone123456 8”, 8 is Chinese time
zone, If your country time zone is minus, send SMS time zone123456

Related product manuals