GRMON3-UM
June 2019, Version 3.1.0
85 www.cobham.com/gaisler
Command
Name
Description
rtg4fddr Print initialization sequence
rtg4serdes Print initialization sequence
run Reset and start execution
scrub Control memory scrubber
sdcfg1 Show or set reset value of SDRAM controller register 1
sddel Show or set the SDCLK delay
sf2mddr Print initialization sequence
sf2serdes Print initialization sequence
shell Execute shell process
silent Suppress stdout of a command
spim Commands for the SPI memory controller
spi Commands for the SPI controller
spwrtr Spacewire router information
stack Set or show the intial stack-pointer
step Step one ore more instructions
stop Interrupts current CPU execution
svga Commands for the SVGA controller
symbols Load, print or lookup symbols
thread Show OS-threads information or backtrace
timer Show information about the timer devices
tmode Select tracing mode between none, processor-only, AHB only or both.
uhci Controll the USB host UHCI core
usrsh Run commands in threaded user shell
va Translate a virtual address
verify Verify that a file has been uploaded correctly
vmemb AMBA bus 8-bit virtual memory read access, list a range of addresses
vmemh AMBA bus 16-bit virtual memory read access, list a range of addresses
vmem AMBA bus 32-bit virtual memory read access, list a range of addresses
vwmemb AMBA bus 8-bit virtual memory write access
vwmemh AMBA bus 16-bit virtual memory write access
vwmems Write a string to an AMBA bus virtual memory address
vwmem AMBA bus 32-bit virtual memory write access
walk Translate a virtual address, print translation
wash Clear or set memory areas
wmdio Set PHY registers
wmemb AMBA bus 8-bit memory write access
wmemh AMBA bus 16-bit memory write access
wmems Write a string to an AMBA bus memory address
wmem AMBA bus 32-bit memory write access
To Next Page
Loading...