Page 12 For technical questions, please call 1-888-866-5797. Item 63890
Live
Note: This menu allows you to
configure channel parameters.
Figure J
Channel: Select the channel you want to modify.
Channel Name: Enter the name of the channel.
Show Name: Enable to display the
channel name on the live screen.
Record Time: Disable if you do not want to
see the recording time on the channel.
OSD Position: Click Setup to determine where
you want the channel name and current date to
be displayed when you are viewing the channel.
Drag the channel name box and the date/time box
to the desired location on the channel view.
Covert: Enable if you want to hide this channel
from appearing on the Live Viewing screen.
Disabling or enabling this option does not
affect video recording on the HDD.
AHD EQ: Enable or disable AHD EQ
(Enhanced Quality) function. Configure this
parameter if you are an advanced user.
Show Time: Disable if you do not want the
current time to appear on the channel.
1. Click Setup in the Color row from Figure J
to configure video color settings. You
will see the screen shown below.
Figure K
HUE: Changes the color mix of the image.
BRIGHT: Defines how bright the
image appears on the display.
CONTRAST: Increases the difference between the
darkest black and the whitest white in the image. Modify
the contrast if the sections of the image look “greyed out”.
SATURATION: Alters how much color is displayed
in the image. The higher the saturation, the brighter
and vivid colors will appear to be. Setting this
parameter too high can degrade the image quality.
Output
Note: This menu allows you to configure
video output parameters.
Figure L
Video Output: This is the monitor that
you use for live view display.
Sequence Mode: Choose your favorite
layout from the drop-down menu for viewing
channels in a sequence on live view.
SEQ Dwell Time: Set how long you want the live
view from a channel to be displayed in a sequence.
VGA/HDMI Resolution: Select the highest resolution
your monitor/TV supports. The higher the resolution,
the more details you will see on your images. The
DVR will restart after you change the resolution.
Transparency: Decide how transparent you want
the menus to be. Choose partially transparent
(see-through) if you need to keep an eye on
happenings while adjusting settings.
Support Overscan: Check to adjust the position
of the video image on the live viewing screen.
To Next Page
Loading...
Need help?
General
