How to prevent Cobra 63890 from overheating?
To prevent your Cobra DVR from overheating, place it in a location with good air circulation and away from heat sources. This will help ensure the stability and longevity of the device.
What to do if I cannot log in Cobra 63890 DVR client?
If you can't log in to your Cobra DVR client, verify that your network settings are correct and the RJ-45 port is working. Also, double-check that you've entered the correct account name and password.
Why won't my Cobra 63890 DVR remote control work?
If the remote control isn’t working with your Cobra DVR, make sure you're aiming it at the IR receiver on the front panel. Also, check the batteries and make sure the remote itself isn't broken.
Why Cobra DVR cannot control PTZ?
If your Cobra DVR cannot control PTZ, check for these potential issues: a malfunctioning PTZ on the front side, incorrect settings, connection, or installation of the PTZ, incorrect PTZ settings, or a mismatch between the protocol or address of the PTZ decoder and the DVR.
What to do if I cannot find any records during Cobra 63890 DVR playback?
If you're not finding any records during playback on your Cobra DVR, check that the data line for the HDD is working and that the system time is correct. Try again a few times, and then restart the system.
What to do if there is abnormal video signal after connecting Cobra DVR and camera?
If you're experiencing an abnormal or nonexistent video signal after connecting your Cobra DVR and camera, check the network cable at the DVR to ensure it's firmly connected and in good condition. Also, confirm that the NTSC or PAL setting is consistent between the devices.
How to fix Cobra DVR if system does not detect the HDD?
If the system does not detect the HDD, check that the power supply, data cord, and power cables are properly connected. Double-check that the HDD is properly supported by the system.
Why does my Cobra 63890 buzzer go off persistently?
If the buzzer on your Cobra DVR goes off persistently, check the alarm settings to see if motion detection is enabled, if object motion is constantly being detected, or if the I/O alarm is set to 'Always Off'.
Why dynamic detection will not work on Cobra 63890 DVR?
If dynamic detection isn't working on your Cobra DVR, check that the motion detection time and regional settings are correct, and that the sensitivity isn't set too low.
Why alarm will not work on Cobra 63890 DVR?
If the alarm on your Cobra DVR isn't working, check that the alarm setting, alarm connection, and input signals are correct.
Safety measures before installing surveillance equipment, ensuring proper footing and balance.
Guidelines for safe usage, emphasizing it's not a toy and should be used as intended.
Precautions to prevent electric shock and damage to cameras and power adapters during use.
Safety guidelines for the DVR, including airflow, power adapter use, and avoiding disassembly.
Technical specifications for the DVR unit, including storage, video format, I/O, and resolution.
Technical specifications for the cameras, covering lens, resolution, night vision, and environmental ratings.
Information on connecting the DVR for remote viewing via smartphone app.
Guides through initial DVR setup steps like HDD formatting and network configuration.
Details on setting up network parameters like DHCP, PPPoE, or Static IP for internet connectivity.
How to define recording modes (Normal, Motion, Alarm) for each channel based on time.
Settings for date, time, language, video format, and other system-wide parameters.
Detailed setup for network types (DHCP, PPPoE, Static, 3G) and parameters like IP address and gateway.
Configuring motion detection sensitivity, areas, post-recording, and notifications.
How to search for recorded video based on channel, date, and type (Normal, Motion, Alarm).
How to search for specific events, view recording lists, and make backups to a USB drive.
How to format, check health (S.M.A.R.T.), and configure HDD settings like overwrite and eSATA recording.
Settings for PTZ cameras, including protocol, baudrate, data bits, parity, and cruise mode.
How to use the control panel to pan, tilt, zoom, focus, and set preset points for PTZ cameras.
Steps to download and install the necessary web client plugin for browsers like IE, Chrome, and Firefox.
Instructions for downloading, installing, and setting up the mobile app for remote DVR access.
A guide to diagnosing and resolving common issues like HDD detection, password loss, video signal problems, and network connectivity.
General| GPS | Yes |
|---|---|
| G-Sensor | Yes |
| Loop Recording | Yes |
| Channels | 1 |
| Remote Viewing | No |
| Motion Detection | Yes |
| Night Vision | Yes |
| Operating System | Not applicable |
To Next Page
